Factory direct sales 20 ton 21 ton 22 tons 23 tons hydraulic excavator

XG821 XG822 excavator oil filter, Isuzu engine oil filter JX767,  

XG821 XG822 excavator oil filter, Isuzu engine air filter  

Excavator monitor is an important device mainly used to monitor the operating status and working conditions of excavators. Here is a detailed introduction to excavator monitors: Main Function: The excavator monitor uses sensors installed on various parts of the excavator to observe the machine's status, processes the received information, displays it on a panel, and reports the machine's status to the operator. Its main functions include detecting machine faults, displaying the machine's operation and status, and constantly displaying the machine's status. Panel Display: The panel display of the monitor can be divided into several parts, including the monitor section (which issues alarms when a machine fault is detected), the indicator section (which displays the machine's operation and status), the instrument section (which constantly displays the machine's status), and the electrical accessories switch (installed on the inner side of the monitor panel). In summary, the excavator monitor is an important device that helps operators better understand the operating conditions of excavators, improves work efficiency and safety by monitoring and displaying real-time information about the excavator's status.

The ECU controller is responsible for a range of functions, including: Monitoring engine parameters such as air intake, exhaust gas temperature, and oil pressure. Adjusting the engine's ignition timing and fuel injection to achieve optimal performance and emission control. Preventing engine damage due to overheating or other malfunctions. Diagnosing and troubleshooting engine issues through on-board diagnostics (OBD) systems. The ECU controller is a microprocessor-based device that uses complex algorithms to process the input signals and generate control signals for the engine's actuators, such as the ignition coil and injectors. These control signals adjust the operation of the engine to ensure it runs efficiently and within specified parameters. In addition to managing engine operation, the ECU controller also plays a role in emissions control. It adjusts the engine's air-to-fuel ratio and other parameters to minimize harmful emissions and comply with emission standards. The Komatsu excavator engine ECU controller is designed to be robust and reliable, able to withstand the harsh operating conditions of construction sites and other demanding environments. It provides crucial support for the engine's smooth operation and helps maximize the performance of Komatsu excavators.  

The Komatsu PC200-8 Excavator engine fuel pump metering valve solenoid valve flow control valve is a crucial component of the fuel system in this type of excavator. Its primary function is to regulate and measure the supply of fuel to the engine, ensuring its smooth operation. This valve offers precise control over fuel flow, enhancing fuel efficiency, reducing fuel consumption, and decreasing pollutant emissions. It achieves this through a precise metering action, which adjusts the amount of fuel delivered to the engine based on its operational requirements, such as load and rpm. The solenoid valve portion manages the initiation and cessation of fuel delivery, enabling precise control over fuel supply. Manufactured from high-quality materials and precision-engineered to exacting standards, this valve offers exceptional reliability and durability. Its design is practical, facilitating easy installation and maintenance, which can lead to cost-effective operation over its lifespan. The Komatsu PC200-8 Excavator engine fuel pump metering valve solenoid valve flow control valve is specifically designed for use in the fuel systems of Komatsu PC200-8 excavators but can also be used in similar applications. It's essential to maintain cleanliness and undertake regular maintenance to guarantee the valve's optimal performance and extend its service life. Any signs of malfunction or irregularities should be promptly inspected and rectified.

The excavator high pressure sensor pressure switch is a vital component in the hydraulic system of an excavator. It is responsible for monitoring the pressure levels within the hydraulic circuit and ensuring smooth operation of the excavator's various functions. The pressure switch senses the pressure of the hydraulic fluid and triggers a response when the pressure reaches a certain threshold. This response can be used to control various functions of the excavator, such as the boom, arm, bucket, and other attachments. By monitoring the pressure levels, the pressure switch helps to ensure that these functions are performed effectively and safely. The pressure switch is typically installed in the hydraulic circuit of the excavator and interfaces with the control system. It receives input from the pressure sensors and sends signals to the control unit, which then actuates the necessary valves and actuators to control the hydraulic flow. This allows precise control over the excavator's movements and functions. The pressure switch is designed to withstand the rugged conditions of construction sites and is made from durable materials. It is crucial for maintaining the overall performance and reliability of the excavator. Regular maintenance and inspection of the pressure switch are essential to ensure its proper operation and longevity. Overall, the excavator high pressure sensor pressure switch is a crucial component in ensuring smooth operation and precise control of the excavator's functions. Its reliable performance and durability make it an essential part of any construction site.

The Cat excavator pump and proportional solenoid valve are crucial components of the excavator's hydraulic system. The pump is responsible for generating the oil flow that powers the machine's various functions, while the solenoid valve regulates the pressure and flow of hydraulic fluid to control the movements of the machine's components. The Cat excavator pump is a high-performance unit designed to provide consistent and reliable oil flow to the hydraulic system. It is engineered to withstand the rigorous demands of excavator operation, ensuring maximum productivity and efficiency. The pump is carefully matched to the specific requirements of the excavator, ensuring optimal performance and compatibility. The proportional solenoid valve is a precision-engineered component that allows for precise control of the hydraulic system. It senses changes in pressure and adjusts the flow of hydraulic fluid accordingly, enabling smooth and accurate operation of the excavator's boom, arm, bucket, and other attachments. The solenoid valve ensures accurate control of the hydraulic system, enhancing the overall performance and productivity of the excavator. By replacing the pump and installing a proportional solenoid valve from a reliable manufacturer, you can enhance the performance and durability of your Cat excavator. Genuine Cat parts are designed to work seamlessly with your machine, ensuring optimal performance and durability. Regular maintenance and inspections are also crucial for ensuring the longevity of your excavator and its components. Remember to only use genuine Cat parts and accessories to maintain your excavator. Contact your Cat dealer or authorized service provider for more information on available genuine Cat parts and their application in your specific model of excavator.

The XCMG excavator parts GPS remote controller is an advanced control system designed to enhance the operational efficiency and safety of excavators. Here are the main features of this controller: Real-time positioning: The GPS remote controller acquires real-time position information of the excavator, allowing operators to remotely monitor the location and working status of the machine. Remote control: Through the GPS remote controller, operators can operate the excavator from a remote control room, reducing the number of on-site operators and risks. Data recording and analysis: The GPS remote controller records historical work data of the excavator, including location, workload, operating time, etc. This data can be used to analyze the performance and efficiency of the excavator, helping to optimize work processes. Energy saving and environmental protection: By optimizing the operating time and workload of the excavator, the GPS remote controller helps to reduce energy consumption and emissions, in line with green construction requirements. High reliability: The GPS remote controller adopts advanced technologies and high-quality materials to ensure reliability and stability, meeting the needs of various harsh working environments. In summary, the XCMG excavator parts GPS remote controller features real-time positioning, remote control, data recording and analysis, energy saving and environmental protection, as well as high reliability. It can enhance the operational efficiency and safety of excavators, reduce energy consumption and emissions, and comply with green construction requirements.